Proel Lite LT15A

Proel

Reviewed by Ian Forest

Reviewed in Pro Mobile Issue 70

MRSP

Website -

Equipment category - Sound Systems

-designed speaker systems. Almost everything that comes out of Italy oozes style and just looks simply… beautiful. A beautiful speaker system? That doesn’t sound right, does it?

But the new LITE range from Proel certainly does ‘sound right’! 7722 I’m going to be honest, when (Pro Mobile Editor) Eddie Short approached me to do a review on the LT15As I had absolutely no idea at all what to expect. Proel, to me, wasn’t a ‘big’ name in the PA industry. I have loads of their stage equipment products, such as mic stands and so on, but it wasn’t one of the fi rst names I would have thought of if I were shopping around for a new PA system.

However, aft er a bit of research, I was incredibly excited to learn that PROEL was, up until recently, the parent company of Turbosound Ltd, a very well-known name in the sound-reinforcement industry based just around the corner from me in Sussex. With this knowledge, I had no doubt that PROEL would have ingested a wealth of Turbosound’s experience in speaker design during its ownership of the brand. The last set of speakers I from Turbosound was the impressive Milan series (introduced during PROEL’s ownership) and these went on to be quite popular.

Proel Lite LT15A

So, what happens when you combine classic Italian styling with many years of good old-fashioned experience in designing and building speakers? The LITE range from Proel off ers a wide selection of diff erent cabinet sizes for a multitude of diff erent applications. You’ll fi nd a selection of active cabinets from 6” all the way up to a dual-15” as well as the LT812A single sub + 2 satellites format. In addition, there’s also a range of passive cabinets and versions available in a white fi nish if you’re that way inclined.

Clearly, there’s something for everyone! It’s been a long while since I last picked up a 15” cabinet made out of plywood, so forgive my immediate lack of excitement when faced with the LT15As which are made out of that very stuff . I was taken back in my mind to the dark beginnings of my own mobile DJ life, recalling memories of carrying around insanely heavy passive JBL TR125s at a heft y 28kg per cabinet. So, I swallowed a couple of cans of spinach and took the LT15As out of the box… and almost immediately launched them into orbit! ‘LITE’ not only by name, but also by nature!

In fact they only actually weigh just 21kg per cabinet – which is pretty impressive for a 15” full range plywood enclosure! This low weight has been achieved by the use of lightweight plywood cabinet construction and well-designed lightweight components, which is good because I never did like Spinach anyway! So, let’s get technical. The LT15A, as the name suggests, is based around a 15” low frequency speaker PROEL LITE LT15A proel LITE lt15a off ering 250w RMS and a 1” compression driver delivering 50w RMS.

Proel Lite LT15A

Max SPL comes in at 126dB and the whole thing is stored inside a vented, almost wedge-shaped, enclosure. On the front you have a well-fi tted, full face, convex steel grille which I really like and much prefer to the type of cabinet you see with the horn on display. The LT15A is fi nished with a scratch-resistant paint and features handles on the side and a plethora of M10 mounting holes which remind you that the LITE range is not only perfect for portable use but for install too.

The pair of side handles provide chunky metal grip bars with enough space around them to proof two different tect your hands and, more imporwhich I think tantly, your knuckles. sonally fi nd that slightly angled Around the back you’ve got a simple, visually better well laid out and clearly labelled constaring straight trol panel, featuring an IEC power think diff erent, input, combined XLR/jack input and the option to XLR output to link to another unit. if you wish.

From For control there is an input level of view, slightly pot, ground lift switch, and a switch off er better which allows you to choose between you have that a LINE or MIC level input. There are also a couple of extra pots that allow I’m sure you’re you to tweak the LOW and HIGH EQ they sound like, settings which I like, especially if you actual ‘live gig’ are using the speakers on their own from my Pioneer without a mixer. These also come XLR balanced into their own when you want to ‘roll inputs on the off ’ any unwanted bass for example and found that or if you want to use the LT15A as sound really a fl oor monitor - which you can, due at maximum to the wedge-shaped design of the hearing, as I fi cabinet.

You’ll also fi nd a couple of speaker cabinet LEDs telling you if the power is ON little bright to and if the limiter kicks in. It’s always the LT15A I can nice to know that if you accidentally at the cabinet, overdrive the speakers too much quency pot, if that the dual-circuit limiter will enground music sure there’s no distorted sound. All with a microphone. in all, the connections and controls are fairly basic, but they do what it The SPL off ered says on the tin. not be the but I found a Underneath, where the speaker be extremely stand slides in, you have the choice with diff erent PROEL LITE LT15A angle settings, the cabinets angled in diff erent pois quite neat.

Proel Lite LT15A

I persitions. The fi rst room I tried them a pair of speakers in was good for up to 100 people, down, and in, looks while the other accommodated douthan a pair of cabinets ble that, but in both cases I placed outwards. You may the speakers on stands roughly 12ft but it’s good to have apart. Walking around both rooms I display them like that found the sound to be clear, smooth a technical point and oozing a lot of clarity using fl at angled speakers also EQ - irrespective of where I stood. audience coverage, so As you would expect with a 250w to consider also.

LF driver, there’s clearly a limit to how much bottom end you can get itching to know what out of them. I found that the low so I’ll move onto my end trickled away about 15m from tests. I went straight source, but that shouldn’t really DDJ-SZ using the be a big problem if you are purely outputs into the XLR concentrating your sound on the back of each cabinet dancefl oor area. they do actually nice, if a little ‘bright’ If you want to use the LT15As with volume.

Maybe it’s my subs then, visually speaking, I feel nd that almost every that they would look great on top I review sounds a of a pair of SW118s, also from Proel. me! But at least with This, I’m sure, would give very good round it off a little results and make the most of the using the HIGH freavailable output. I’m just playing backor using the speakers In summary, I can’t help but like the LT15As - which is strange, because in my slowly advancing years my initial by the LT15A may reaction was that I wouldn’t want to highest in its category, carry a 15” cabinet around anymore! pair of the speakers to They are very easy to set up and deeffi cient when faced liver a fantastic clear sound, perfect sized rooms and with for small to medium sized venues.