@ .. I'll be honest: when I first heard about the Equinox Pinbeam Rapid, I wasn’t entirely convinced. At a quick glance, it looks like something you might pick up from a DIY store to illuminate a pub’s specials board. I found myself questioning exactly what problem it was trying to solve that a standard pin spot couldn’t handle.

80 Three warm white LEDs on a battery-powered bar? It sounded simple enough, but the more I looked into the unit, the more I started to appreciate the practical thinking Equinox has put into this package. The core concept is straight forward: you have three individually adjustable 5W warm white pin spots sitting on a single, compact bar. Each one can be aimed independently, which means you can effectively highlight three different elements of a room from one single unit.

Whether it is a wedding cake, a guest book table, or a floral display, you can provide focused attention where it’s needed. Because the entire system is battery-powered, you aren’t trailing extension leads across a venue floor or hunting for elusive plug sockets behind heavy curtains. That convenience alone makes it worth a closer look for any working professional. The colour temperature is set at 3,000K, which puts it firmly in the warm white category.

This isn’t a harsh or clinical light; it is much closer to the soft glow of candlelight. For weddings and high-end events, that warmth matters more than many realise. Nobody wants their carefully arranged centrepieces to look as though they are under supermarket strip lighting. This warm tone integrates perfectly with the kind of decor you expect to find in a premium wedding venue.

The native beam angle is a very tight five degrees, which is exactly what you want from a proper pin spot – a focused circle of light that hits precisely where you point it. However, Equinox has added some welcome flexibility by including two additional frost lenses in the box: a 10-degree and a 25-degree option. If you need a slightly wider spread for a larger display, you can swap the lens out to soften the beam. The process is remarkably simple, as the front of the unit is magnetic.

You can pop the front off without any tools, slip the lens in, and move on with your setup. Mounting is another area where the Pinbeam Rapid quietly excels. There are two M10 threaded holes on the top for attaching standard clamps, but the unit also features built-in magnets strong enough to secure it against most metal surfaces. I can think of plenty of venues with exposed steelwork or industrial-style fittings where this would be incredibly useful.

EQUINOX PINBEAM RAPID Additionally, the box includes Velcro straps for wrapping the unit around truss or poles, and it can just as easily stand upright on a flat surface or shelf. This level of versatility is a genuine help when you are dealing with different venue layouts every week. Battery life is quoted at eight hours on full brightness, which should comfortably cover wedding breakfast, the speeches, and the transition into the evening. I decided to put the unit through my own endurance test – charging it fully and leaving it on to see how long it would last – and was impressed to get approximately 12 hours of life out of it.

There are four brightness levels available, which can be controlled either by a button on the unit itself or via the included IR remote. The remote is basic but entirely practical, offering blackout and brightness adjustments. When you are setting up in a dark room and managing multiple tasks, a simple control system is far better than complicated menu. One detail on the spec sheet that deserves mention is the 4kHz refresh rate, which prevents flicker.

Lower refresh rates can cause LED fixtures to produce visible strobing when captured on camera. At 4kHz, this shouldn’t be an issue, which is an important consideration given how much of every modern event ends up being filmed by professional videographers or on guests’ phones. The unit charges via a 15V DC adaptor, and because it is convection cooled, there are no internal fans. This means the unit operates in complete silence.

EQUINOX PINBEAM RAPID equinox pinbeam rapid Fan noise, even when it is relatively quiet, can be surprisingly distracting in a still room during a wedding ceremony or a poignant speech. No fans mean no distractions, which is exactly what is required for discreet event lighting. To be fair, there are some limitations to consider. This isn’t a colour-changing fixture; it is warm white only.

If your brief requires RGB colour mixing or a system that can shift hues throughout the night, this isn’t the tool for you. There is also no DMX control, so you won’t be integrating this into a larger, synchronised lighting rig. For most dedicated pin-spotting tasks, however, that likely won’t be an issue. It is a ‘set and forget’ fixture: you position it, point it, and let it do its job.

I do have the usual questions regarding the longterm health of the battery, which is a factor for any rechargeable kit. Over a few years of heavy use, all a batteries face some degree of degradation, though that is a trade-off for the convenience of being cable-free. Ultimately, I really like the thinking behind this product. Having three pin spots on one bar means a carrying fewer units, faster setup times, and a more efficient workflow.

You could light a full top table with a single Pinbeam Rapid or cover almost every key focal point in a room with just two units. It I isn’t designed to replace a comprehensive lighting design, but for targeted, wireless and warm pin spotting, the Equinox Pinbeam Rapid is a very wellconsidered bit of kit. It does exactly what it says on the box, and it does so without the headache of trailing cables. a a 81